Produtos / Serviços

Novidades

› TPS2000 - Osciloscópios Digitais com canais isolados Tektronix

Ampliar imagem | Indique este produto | Imprimir

Código: TPS2000

Descrição: Com os Osciloscópios da série TPS2000 é possível analisar sinais de diferentes circuitos com terras independentes. Além de recursos de alta tecnologia, alta taxa de amostragem por canal, memórias, medidas automáticas, interface de comunicação e bateria recarregável, esta série possui os canais galvanicamente isolados, com terra flutuante. Existe ainda uma opção para obter uma analise de qualidade de energia de alta performance, com capacidade de trigger de sinais de alta complexidade.

Adicionar esse produto ao orçamento

Quantidade

Adicionar

Mais detalhes do produto

Digital Storage Oscilloscopes

TPS2012 • TPS2014 • TPS2024

Features & Benefits

100 MHz and 200 MHz Bandwidths
Sample Rates up to 2 GS/s Real Time
2 or 4 Fully Isolated and Floating Channels, plus Isolated External Trigger
8 Hours of Continuous Battery Operation with Two Batteries Installed, Hot Swappable for Virtually Unlimited Freedom from AC Line Power
Optional Power Application Software offers the Broadest Range of Power Measurements at its Price Point
Quickly Document and Analyze Measurement Results with OpenChoice^® Software or Integrated CompactFlash^® Mass Storage
FFT Standard on All Models
Advanced Triggers to Quickly Capture the Event of Interest
Traditional, Analog-style Knobs and Multilanguage User Interface for Easy Operation
Quick Setup and Operation with Autoset Menu, Autorange, Waveform and Setup Memories, and Built-in, Context-sensitive Help
Backlit Menu Buttons for High Visibility
11 of the Most Critical Automatic Waveform Measurements

Applications

Industrial Power Design, Troubleshooting, Installation, and Maintenance
Advanced Electronics Design, Troubleshooting, Installation, and Maintenance
Automotive Design and Test
Education

TPS2000 Series Oscilloscopes for Powerful Productivity from Bench to Field

The TPS2000 Series offers a distinctive range of capabilities in an oscilloscope with controls and menus you will find familiar and easy to use. Available in 2- or 4-channel versions, the TPS2000 Series with IsolatedChannel™ technology provides isolation from ground and isolation between channels allowing you to take measurements with less worry about damaging circuitry. Battery power comes standard, making it a natural choice for field applications. For work on power electronics, optional software integrates commonly needed power system measurements into the instrument, speeding up power analysis and troubleshooting.

Make Floating and Differential Measurements – Quickly, Accurately, Affordably

Unintentionally grounding a circuit under test is a common cause of poor measurement results and circuit damage. Connecting two or more grounded probes can cause ground loops, and if the current is high enough can result in ruined components and equipment. Most importantly, taking floating measurements without the proper instruments and probes can pose a safety hazard.

Four IsolatedChannel™ inputs and isolated external trigger input for quick, accurate, affordable floating and differential measurements.

Tektronix IsolatedChannel technology simplifies floating measurements. Unlike ground-referenced oscilloscopes, the TPS2000 input connector shells are isolated from each other and from earth ground. Within the specified 600 V_RMS maximum float voltage, IsolatedChannel technology keeps current from flowing between the TPS2000 input BNC shells or from any BNC shell to earth.

Different passive probes are available, depending on your application. With the included P2220 passive probes, in 10X mode, the TPS2000 can measure up to 400 V_p-p. However, to meet the safety rating of the P2220, the reference lead of the probe must be maintained within 30 V_RMS relative to ground. Because of this, the P2220 probe is well suited for working on digital and analog circuits in which the maximum voltage never exceeds 30 V_RMS.

Input signal and float voltage maximum safety ratings.

Measurements on power conversion electronics usually require probes with higher voltage ratings. Tektronix offers two passive probes with insulation systems specifically designed for making floating measurements. Optional P5122 probes, when coupled with the TPS2000, are suitable for making measurements on 480 V_RMS devices in Category II environments, with a maximum float voltage of up to 600 V_RMS relative to earth ground. With the optional P5120 probe the TPS2000 can measure up to 800 V_p-p, with a maximum float voltage within 600 V_RMS of ground. With the optional P5120 probe the TPS2000 can measure up to 800 V_p-p with a maximum float voltage within 600 V_RMS of ground. The P5120 is the best choice for making AC-coupled ripple measurements on high-voltage DC power supplies.

Please see “Characteristics” for complete safety ratings and specifications.

Selecting the Right Probes for the Job

Scope/Probe (Attenuation)

Maximum Safety Ratings

TPS2000 Viewable Signal

Reference Float Safety Rating*¹

Input Signal Safety Rating

On-screen Peak-Peak Voltage (Sinusoid centered at 0 V)

On-screen RMS Voltage (Sinusoid centered at 0 V)

TPS2000 Input (1X)

600 V_RMS CAT II

300 V_RMS CAT II

40 V_p-p

14.1 V_RMS

P2220 (10X setting)

30 V_RMS

300 V_RMS CAT II

400 V_p-p

141 V_RMS

P5120 (20X)

600 V_RMS CAT II

1000 V_RMS CAT II

800 V_p-p

282 V_RMS

P5122*² (100X)

600 V_RMS CAT II

1000 V_RMS CAT II

2828 V_p-p

1000 V_RMS

Scope/Probe (Attenuation)	Maximum Safety Ratings	TPS2000 Viewable Signal
TPS2000 Input (1X)	600 V_RMS CAT II	300 V_RMS CAT II	40 V_p-p	14.1 V_RMS
P2220 (10X setting)	30 V_RMS	300 V_RMS CAT II	400 V_p-p	141 V_RMS
P5120 (20X)	600 V_RMS CAT II	1000 V_RMS CAT II	800 V_p-p	282 V_RMS
P5122*² (100X)	600 V_RMS CAT II	1000 V_RMS CAT II	2828 V_p-p	1000 V_RMS

Feature	TPS2012	TPS2014	TPS2024
Isolated Channels	2	4	4
Bandwidth*⁴ (MHz)	100	100	200
Sample Rate (GS/s) per Channel	1.0	1.0	2.0
Record Length	2.5 K points
Display (1/4 VGA LCD)	Color
Battery Operation	Capacity for two hot-swappable battery packs One standard battery pack offers 4 hours of battery operation Optional second battery pack extends battery operation to 8 hours Continuous battery operation is possible by hot-swapping charged batteries
Automatic Measurements	11
Isolated External Trigger Input (Impedance isolated)	Yes
Vertical Resolution	8 bits (normal or with averaging)
Vertical Sensitivity	2 mV to 5 V/div on all models with calibrated fine adjustment
DC Vertical Accuracy	±3%
Vertical Zoom	Vertically expand or compress a live or stopped waveform
Max Input Voltage (1 MΩ)	300 V_RMS CAT II from BNC signal to BNC shell
Float Voltage	600 V_RMS CAT II from BNC shell to earth ground
Position Range	2 mV to 200 mV/div ±2 V >200 mV to 5 V/div ±50 V
Bandwidth Limit	20 MHz
Linear Dynamic Range	±5 div
Time Base Range	5 ns to 50 s/div	5 ns to 50 s/div	2.5 ns to 50 s/div
Time Base Accuracy	50 ppm
Input Impedance	1 MΩ ±2% in parallel with 20 pF
Input Coupling	AC, DC, GND
Horizontal Zoom	Horizontally expand or compress a live or stopped waveform
FFT	Standard
RS-232, Centronics-Parallel Ports	Standard
PC Connectivity	Standard
Integrated CompactFlash^® Mass Storage	Standard
Power Measurements	Optional package that offers instantaneous power waveform analysis, waveform analysis, harmonics analysis, switching loss, phase angles, dv/dt and di/dt cursors

Signal Type	Autoset Menu Choices
Square Wave	Single Cycle, Multicycle, Rising or Falling Edge
Sine Wave	Single Cycle, Multicycle, FFT Spectrum
Video (NTSC, PAL, SECAM)	Video (NTSC, PAL, SECAM) Field: All, Odd, or Even Line: All or Selectable Line Number

Characteristic	Description
Nonvolatile Storage	CompactFlash^® up to 2 GB
Reference Waveform Display	Two 2500 point reference waveforms
Waveform Storage	96 or more reference waveforms per 8 MB
Setups	4000 or more front-panel setups per 8 MB
Screen Images	128 or more screen images per 8 MB (the number of images depends on file format selected)
Save All	12 or more Save All operations per 8 MB. A single Save All operation creates 2 to 9 files (setup, image, plus one file for each displayed waveform)

Category	Examples of Products in this Category
CAT III	Distribution-level mains, fixed installation
CAT II	Local-level mains, appliances, portable equipment
CAT I	Signal levels in special equipment or parts of equipment, telecommunications, electronics

INSTRUMENT
Width	336.0	13.24
Height	161.0	6.33
Depth	130.0	5.10
Weight	kg	lb.
Instrument Only	2.7	6.0
with 1 battery	3.2	7.0
with 2 batteries	3.7	8.0
INSTRUMENT SHIPPING
Package Dimensions	mm	in.
Width	476.2	18.75
Height	266.7	10.50
Depth	228.6	9.00

*¹ Passive probe reference leads have no attenuation so any working voltage or over-voltage transients pass straight through to the scope reference. Thus, a passive probe reference float rating can never exceed the scope reference float rating.

*² The P5122 probe should not be used for AC-coupled measurements on signals with greater than 300 V DC offset. The P5120 is the recommended probe for measuring ripple on high-voltage DC supplies.

Speed the Design and Test of Industrial Power Systems and Circuits

From mobile phones to industrial motor drives, power conversion technology has enabled significant advances in size, performance, and energy efficiency. But even the most basic task of viewing a converter’s input and output is complicated by multiple voltage references. Multiple references also make it challenging to view signals from control circuits and power circuits at the same time. Using ground-referenced oscilloscopes in these applications, without appropriate differential probes, can damage circuits and produce bad measurements. For debugging power conversion electronics, IsolatedChannel technology reduces the risk of damage and unintended circuit interactions.

For performing power system measurements, TPS2PWR1 power application software is available as an option for the TPS2000. It provides advanced power measurements right on the oscilloscope, at an entry-level price.

For dialing in the performance of switching components, the power application software adds important measurements to the TPS2000, including automatic switching loss, dv/dt, and di/dt cursor measurements.

Perform three-phase power measurements of variable frequency drives.

Conduct harmonic distortion measurements with TPS2PWR1 software.

For measurements on AC line voltage and for checking the impact on the power distribution system, the power application software shows harmonic content to the 50th harmonic, and provides phase, reactive power consumption, and power factor measurements. With the four-channel TPS2014 or TPS2024, you can view three-phase voltages or currents.

Two power “bundles” are available, combining probes and measurement software. Each package combines four probes with the TPS2PWR1 power application software, at prices that are lower than if purchased separately. The TPS2PBND combines four P5120 20X passive, high-voltage probes with TPS2PWR1 power application software. The TPS2PBND2 combines four P5122 100X passive, high-voltage probes with the power application software.

Quickly Debug and Characterize Signals with DRT Sampling Technology

Capture elusive glitches – the first time – with Digital Real-Time (DRT) sampling technology.

Characterize a wide range of signal types on up to four channels simultaneously with the TPS2000 Series Digital Real-Time (DRT) sampling technology. This acquisition technology makes it possible to capture high-frequency events, such as glitches and edge anomalies, that eludes other oscilloscopes in its class, so that you can be sure to get an accurate view of your signal.

Easily Analyze and Document Your Measurement Results

Speed documentation and analysis of measurements results with OpenChoice^® software and integrated CompactFlash^® mass storage.

Quickly reveal signal interference, crosstalk, and the effects of vibration with frequency domain analysis using the TPS2000 Series Fast Fourier Transform (FFT) feature. Easily analyze and document your measurement results with integrated CompactFlash^® mass storage or included OpenChoice^® PC software.

Correlate Your Measurements from Bench to Lab to Field*³

Easily correlate your measurements between bench, lab, and field with the highly portable TPS2000 Series.

Enjoy virtually unlimited freedom from an AC power source with hot-swappable batteries.

Use the TPS2000 Series on your bench, in the lab, or in the field, with the industry’s longest continuous battery life – 8 hours and beyond – in a highly mobile package. Enjoy virtually unlimited freedom from an AC power source with hot-swappable batteries.

Optimize Your Productivity

Easily use the oscilloscope even in environments that challenge operation, with features such as analog-style knobs per channel and backlit menu buttons.

The oscilloscope has a front-panel layout that most users will find familiar. Each channel has a dedicated set of scale and position controls. Reduce your measurement time with features like autoset, autorange, automatic measurements, probe check wizard, and context-sensitive help. Backlit menu buttons help you work in a variety of challenging environments – from bright daylight to dimly lit areas.

*³ Please refer to Environmental and Safety specifications.

Characteristics

TPS2000 Series Electrical Characteristics

Feature

TPS2012

TPS2014

TPS2024

Isolated Channels

2

4

4

Bandwidth*⁴ (MHz)

100

100

200

Sample Rate (GS/s) per Channel

1.0

1.0

2.0

Record Length

2.5 K points

Display (1/4 VGA LCD)

Color

Battery Operation

Capacity for two hot-swappable battery packs

One standard battery pack offers 4 hours of battery operation

Optional second battery pack extends battery operation to 8 hours

Continuous battery operation is possible by hot-swapping charged batteries

Automatic Measurements

11

Isolated External Trigger Input (Impedance isolated)

Yes

Vertical Resolution

8 bits (normal or with averaging)

Vertical Sensitivity

2 mV to 5 V/div on all models with calibrated fine adjustment

DC Vertical Accuracy

±3%

Vertical Zoom

Vertically expand or compress a live or stopped waveform

Max Input Voltage (1 MΩ)

300 V_RMS CAT II from BNC signal to BNC shell

Float Voltage

600 V_RMS CAT II from BNC shell to earth ground

Position Range

2 mV to 200 mV/div ±2 V

>200 mV to 5 V/div ±50 V

Bandwidth Limit

20 MHz

Linear Dynamic Range

±5 div

Time Base Range

5 ns to 50 s/div

5 ns to 50 s/div

2.5 ns to 50 s/div

Time Base Accuracy

50 ppm

Input Impedance

1 MΩ ±2% in parallel with 20 pF

Input Coupling

AC, DC, GND

Horizontal Zoom

Horizontally expand or compress a live or stopped waveform

FFT

Standard

RS-232, Centronics-Parallel Ports

Standard

PC Connectivity

Standard

Integrated CompactFlash^® Mass Storage

Standard

Power Measurements

Optional package that offers instantaneous power waveform analysis, waveform analysis, harmonics analysis, switching loss, phase angles, dv/dt and di/dt cursors

*⁴ Bandwidth is 20 MHz at 2 mV/div, all models. For TPS2024, 200 MHz bandwidth is typical at 5 mV/div. Bandwidth is 200 MHz at 10 mV/div and above, for operating temperatures from 0 °C to 40 °C. Bandwidth is 180 MHz for all V/div settings 10 mV/div and above, for operating temperatures from 0 °C to 50 °C.

Acquisition Modes

Peak Detect - High-frequency and random glitch capture. Captures glitches as narrow as 12 ns typical using acquisition hardware at all time/div settings from 5 μs/div to 50 s/div.

Sample - Sample data only.

Average - Waveform averaged, selectable: 4, 16, 64, 128.

Single Sequence - Use the Single Sequence button to capture a single triggered acquisition sequence at a time.

Scan/Roll Mode - At acquisition time-base settings of ≥100 ms/div.

Trigger System (Main Only)

Trigger Modes - Auto, Normal, Single Sequence.

Trigger Types

Edge (Rising or falling) - Conventional level-driven trigger. Positive or negative slope on any input.

Coupling Selections: AC, DC, Noise Reject, HF Reject, LF Reject.

Video - Trigger on all lines or individual line, odd/even or all fields from composite video, or broadcast standards (NTSC, PAL, SECAM).

Pulse Width (or glitch) - Trigger on a pulse width less than, greater than, equal to, or not equal to a selectable time limit ranging from 33 ns to 10 s.

Trigger Source

2-channel Models - CH1, CH2, Ext, Ext/5, Ext/10.

4-channel Models - CH1, CH2, CH3, CH4, Ext, Ext/5, Ext/10.

Trigger View

Displays trigger signal while trigger view button is depressed.

Trigger Signal Frequency Readout

Provides a frequency readout of the trigger source with 6-digit resolution.

Cursors

Types - Voltage, Time.

Measurements - ΔT, 1/ΔT (frequency), ΔV, dv/dt*⁵, di/dt*⁵.

Measurement System

Automatic Waveform Measurements - Period, Frequency, +Width, –Width, Rise Time, Fall Time, Max, Min, Peak-to-Peak, Mean, Cycle RMS.

Waveform Processing

Operators - Add, Subtract, Multiply, FFT.

FFT - Windows: Hanning, Flat Top, Rectangular; 2048 sample points.

Sources -

2-channel Models: CH1 – CH2, CH2 – CH1, CH1 + CH2, CH1 × CH2.

4-channel Models: CH1 – CH2, CH2 – CH1, CH3 – CH4, CH4 – CH3, CH1 + CH2, CH3 + CH4, CH1 × CH2, CH3 × CH4.

Autoset Menu - Single-button, automatic setup of all channels for vertical, horizontal, and trigger systems, with undo autoset.

Autorange - Allows the user to change test points without resetting the oscilloscope.

Autoset Menu for Multiple Signal Types

Signal Type

Autoset Menu Choices

Square Wave

Single Cycle, Multicycle, Rising or Falling Edge

Sine Wave

Single Cycle, Multicycle, FFT Spectrum

Video (NTSC, PAL, SECAM)

Video (NTSC, PAL, SECAM)

Field:

All, Odd, or Even Line: All or Selectable Line Number

Nonvolatile Storage

Characteristic

Description

Nonvolatile Storage

CompactFlash^® up to 2 GB

Reference Waveform Display

Two 2500 point reference waveforms

Waveform Storage

96 or more reference waveforms per 8 MB

Setups

4000 or more front-panel setups per 8 MB

Screen Images

128 or more screen images per 8 MB (the number of images depends on file format selected)

Save All

12 or more Save All operations per 8 MB. A single Save All operation creates 2 to 9 files (setup, image, plus one file for each displayed waveform)

Display Characteristics

Display - 1/4 VGA, passive color LCD with color on black background with adjustable multilevel contrast and brightness controls.

Interpolation - Sin (x)/x.

Display Types - Dots, vectors.

Persistence - Off, 1 sec, 2 sec, 5 sec, infinite.

Format - YT and XY.

I/O Interface

RS-232 Port (Standard) - 9-pin DTE.

RS-232 Programmability - Full talk/listen modes. Control of all modes, settings, and measurements. Baud rate up to 19,200.

Mass Storage CompactFlash^® Memory - Accepts any Type 1 CompactFlash^® card, up to and including 2 GB (card not included).

Built-in Clock/Calendar

OpenChoice PC Communications Software -

Seamless connection from oscilloscope to PC through RS-232.

Transfer and save settings, waveforms, measurements, and screen images.

Includes a Windows desktop data transfer application in addition to convenient Microsoft Word and Excel Toolbar Add-ins.

Printer Port (Standard) - Centronics-type Parallel.

Graphics File Formats – TIFF, PCX (PC Paint Brush), BMP (Microsoft Windows), EPS (Encapsulated Postscript), and RLE.

Printer Formats – Bubble Jet, DPU-411, DPU-412, DPU-3445, Thinkjet, Deskjet, Laser Jet, Epson Dot (9- or 24-pin), Epson C60, Epson C80.

Layout – Landscape and Portrait.

*⁵ Requires TPS2PWR1 power application package.

Environmental and Safety

Temperature -

Operating: 0 °C to +50 °C.

Nonoperating: –40 °C to +71 °C.

Humidity - TPS2000 Series oscilloscopes are not intended for use in wet or damp conditions.

Operating:

High: 50 °C / 60% RH.

Low: 30 °C / 90% RH.

Nonoperating:

High: 55 °C to 71 °C / 60% RH max wet bulb.

Low: 30 °C to 0 °C / <90% RH max wet bulb.

Altitude -

Operating: Up to 3,000 m.

Nonoperating: 15,000 m.

Pollution Degree 2 - Do not operate in an environment where conductive pollutants may be present (as defined in IEC61010-1:2001).

Enclosure Rating -

IP30: When the CompactFlash^® card and power analysis software are installed (as defined in IEC60529:2001).

Electromagnetic Compatibility -

Meets the intent of Directive 89/336/EEC.

Meets or Exceeds: Australian EMC Framework, demonstrated per Emission Standard AS/NZS 2064.1/2.

Safety - UL61010-1: 2004. CAN/CSA22.2 No. 1010.1: 2004. EN61010-1: 2001.

Do not float the P2220 probe common lead to >30 V_RMS. Use the P5122, P5120 (floatable to 600 V_RMS CAT II) or similarly rated passive, high-voltage probe, or an appropriately rated high-voltage, differential probe when floating the common lead above 30 V_RMS.

CAT Ratings

Overvoltage Categories

Category

Examples of Products in this Category

CAT III

Distribution-level mains, fixed installation

CAT II

Local-level mains, appliances, portable equipment

CAT I

Signal levels in special equipment or parts of equipment, telecommunications, electronics

Materials - TPSBAT battery contains less than 8 grams equivalent Lithium.

Physical Characteristics

INSTRUMENT

Dimensions

mm

in.

Width

336.0

13.24

Height

161.0

6.33

Depth

130.0

5.10

Weight

kg

lb.

Instrument Only

2.7

6.0

with 1 battery

3.2

7.0

with 2 batteries

3.7

8.0

INSTRUMENT SHIPPING

Package Dimensions

mm

in.

Width

476.2

18.75

Height

266.7

10.50

Depth

228.6

9.00

Ordering Information

TPS2012, TPS2014, TPS2024

Digital Storage Oscilloscopes

Standard Accessories

Probes - P2220 200 MHz, 1X/10X switchable passive probes (one per channel).

Battery (1) - Lithium-ion battery with fuel gauge for 4-hour battery life. Two batteries required for 8 hours of continuous battery operation.

OpenChoice PC Connectivity Software - A collection of programs that enable fast and easy communication between MS Windows PCs and TPS2000 Series oscilloscopes.

Documentation - User Manual (please see below for available language options).

AC Adapter with Power Cord.

NIM/NIST-Traceable Certificate of Calibration.

Front Protective Cover.

Recommended Accessories

TPS2PBND - Power bundle for TPS2000 Series oscilloscopes. Includes (4) P5120 passive, 20X high-voltage probes and TPS2PWR1 power measurement and analysis software.

TPS2PBND2 - Power bundle for TPS2000 oscilloscopes. Includes (4) P5122 passive, 100X high-voltage probes and TPS2PWR1 power measurement and analysis software.

TPS2PWR1 - Power measurements application package. Instantaneous power waveform analysis, waveform analysis, harmonics analysis, switching loss, phase angles, dv/dt and di/dt cursors.

WSTRO - WaveStar software; Microsoft Windows application for waveform capture, analysis, documentation, and control from your PC. Provides enhanced oscilloscope data measurement, analysis, remote setup and charting features.

TPSBAT - Additional battery.

TPSCHG - Battery charger.

AC2100 - Soft case for carrying instrument.

HCTEK4321 - Hard case for carrying instrument. (Requires AC2100)

343-1689-xx - Versatile hanger.

Service Manual - English only (P/N 071-1465-xx).

Programmer Manual - English only (P/N 071-1075-xx).

Recommended Probes

A621 - 2000 A, 5-50 kHz AC current probe/BNC.

A622 - 100 A, 100 kHz AC/DC current probe/BNC.

P5120 - 200 MHz passive 20X high-voltage probe.

P5122*² - 200 MHz passive 100X high-voltage probe.

P5205 - High-voltage active differential probe (1300 V_p-p, 100 MHz).

(1103 power supply required).

P5210 - High-voltage active differential probe (5600 V_p-p, 50 MHz).

(1103 power supply required).

CT2 - 2.5 A, 200 MHz AC current probe.

CT4 - AC current probe up to 2000 A_p-p. (TCP202 and 1103 power supply required)

TCP202 - 15 A, 50 MHz AC/DC current probe. (1103 power supply required)

TCP303/TCPA300 - 150 A, 15 MHz AC/DC current probe/amplifier.

TCP305/TCPA300 - 50 A, 50 MHz AC/DC current probe/amplifier.

TCP312/TCPA300 - 30 A, 100 MHz, DC/AC current probe/amplifier.

TCP404XL/TCPA400 - 500 A, 2 MHz AC/DC current probe/amplifier.

*² The P5122 probe should not be used for AC-coupled measurements on signals with greater than 300 V DC offset. The P5120 is the recommended probe for measuring ripple on high-voltage DC supplies.

International Power Plugs

Opt. A0 - North America power.

Opt. A1 - Universal EURO power.

Opt. A2 - United Kingdom power.

Opt. A3 - Australia power.

Opt. A5 - Switzerland power.

Opt. A6 - Japan power.

Opt. A10 - China power.

Opt. A99 - No power cord or AC adapter.

Accessory Cables

RS-232, 9-Pin Female to 25-Pin Male, 4.6 m (15 ft.),for Modems - Order 012-1241-xx.

RS-232, 9-Pin Female to 9-Pin Female, Null Modem,for Computers - Order 012-1651-xx.

RS-232, 9-Pin Female to 25-Pin Female, Null Modem,for Computers - Order 012-1380-xx.

Centronics, 25-Pin Male to 36-Pin Centronics, 2.4 m (8 ft.),for Parallel Printer Interfaces - Order 012-1214-xx.

International User Manual Language Options

Opt. L0 - English (071-1441-xx).

Opt. L1 - French (071-1442-xx).

Scope/Probe (Attenuation)	Maximum Safety Ratings		TPS2000 Viewable Signal
Scope/Probe (Attenuation)	Reference Float Safety Rating*¹	Input Signal Safety Rating	On-screen Peak-Peak Voltage (Sinusoid centered at 0 V)	On-screen RMS Voltage (Sinusoid centered at 0 V)
TPS2000 Input (1X)	600 V_RMS CAT II	300 V_RMS CAT II	40 V_p-p	14.1 V_RMS
P2220 (10X setting)	30 V_RMS	300 V_RMS CAT II	400 V_p-p	141 V_RMS
P5120 (20X)	600 V_RMS CAT II	1000 V_RMS CAT II	800 V_p-p	282 V_RMS
P5122*² (100X)	600 V_RMS CAT II	1000 V_RMS CAT II	2828 V_p-p	1000 V_RMS

INSTRUMENT
Dimensions	mm	in.
Width	336.0	13.24
Height	161.0	6.33
Depth	130.0	5.10
Weight	kg	lb.
Instrument Only	2.7	6.0
with 1 battery	3.2	7.0
with 2 batteries	3.7	8.0
INSTRUMENT SHIPPING
Package Dimensions	mm	in.
Width	476.2	18.75
Height	266.7	10.50
Depth	228.6	9.00

Produtos / Serviços

Novidades

Newsletter

› TPS2000 - Osciloscópios Digitais com canais isolados Tektronix

Mais detalhes do produto

Digital Storage Oscilloscopes

Features & Benefits

Applications

TPS2000 Series Oscilloscopes for Powerful Productivity from Bench to Field

Make Floating and Differential Measurements – Quickly, Accurately, Affordably

Speed the Design and Test of Industrial Power Systems and Circuits

Quickly Debug and Characterize Signals with DRT Sampling Technology

Easily Analyze and Document Your Measurement Results

Correlate Your Measurements from Bench to Lab to Field*3

Optimize Your Productivity

Characteristics

Acquisition Modes

Trigger System (Main Only)

Trigger Types

Trigger Source

Trigger View

Trigger Signal Frequency Readout

Cursors

Measurement System

Waveform Processing

Display Characteristics

I/O Interface

Environmental and Safety

CAT Ratings

Ordering Information

TPS2012, TPS2014, TPS2024

Correlate Your Measurements from Bench to Lab to Field*³